If the questions and answers below does not help you, please feel free to contact our office.
Products and Quality
The CE mark is replaced by norm EN1492, because the straps are certified according to this norm, and it has always been a base line for our manufacturing.
EN1492 machine norm clearly states the CE mark to be on the product but the problem is that the bags are not included in the EN1492 machine directive - in principle, this means that our customers can use any bag with no certification.
As permitted, we have followed the norm even though the bags are not included in the norm, which is why we are not allowed to CE mark our bags. We manufacture our bags according to the EN norm, as that is what has been used as a base line for the manufacturing since we began.
In the past everyone was happy with the CE mark on the bags, but we have been instructed by the EU to remove the CE mark from all bags and we are not to show it on the label.
The only way to get the CE mark back on the bags is to have the EU create a standard for the product. This may take some time - but we are working on it!
The EN 1492-1 standard is found in the Council Directive of 17 May 2006 (2006/42/EF). The standard focus on flat woven webbing slings and is at EMG used as guidance for the production of the lifting bags with respect to load factor, marking, inspection interval and instruction manual.
In accordance with EN 1492-1 all of our lifting bags are produced and tested to withstand a vertical safety factor of 7:1 although our internal goals are to pass requirements of at least 10:1.
The ISO 21898 standard focus on flexible intermediate bulk containers and is at EMG used as guidance for the production of lifting bags with respect to load factor, pressure testing and marking.
In accordance with ISO 21898 our lifting bags are produced and tested to withstand a cycle of 70 load tests of safety factor 6:1. This cyclic top lift test will be performed using plastic granulate or actual content. Furthermore, a compression/stacking test will be performed for 6 hours.
Lifting Bags are categorised as ‘Lifted Equipment’ in the United Kingdom and in Europe, and NOT classified as ‘Lifting Equipment’ – they’re neither a Lifting Appliance nor a Lifting Accessory.
Therefore, in the UK they fall under the Provision and Use of Work Equipment Regulations (PUWER) 1998 – NOT LOLER. In Europe, Lifting Bags would fall under the Use of Work Equipment Directive.
EMG Lifting Bags are issued with a manufacturer’s ‘Certificate of Conformity’ which specifies the Harmonised Standards to which the Lifting Bag has been designed in accordance with – this alone is sufficient to satisfy EU & UK Legislation for placing such goods on the open market. The CoC being traceable to the Technical Construction File for that batch of manufactured Lifting Bags i.e., material certificate, manufacturing process, destruction tests, design, coefficient of utilisation etc. etc.
The CoC can also be considered an initial Inspection Report and valid for up to 12-months after issue. Thereafter, Lifting Bags will require a periodic in-service Inspection by a Competent Person in accordance with the local Legislative requirements.
- UK: PUWER Reg 6 Inspection
- EU Directive 2009/104/EC Article 5 Inspection of work equipment
Most of our product range is produced at our facilities in Vietnam.
Custom design
If none of the bags in our product range fits your needs, we offer to tailor a bag or product to your personal preferences.
Read more about custom design solutions here
Company logo or other text and illustrations can be displayed on the products through either embroidery or print. Both options can be done in single or multi-color solutions.
Contact our office to learn about your possibilities.
If our normal color selection does not match your company colors or you are in need of alternative color options to differentiate between projects, we are always ready to try and offer you a desired solution.
Our products can be produced in various color and material combinations, however, be aware that our fabric storage will vary.
Large order quantities are needed for this solution and the delivery time will be longer!
Service
Lifting bags should always be visually inspected before use.
Lifting bags from EMG must be officially inspected every 12 months. Bag inspectors must be trained to inspect and assess lifting equipment. EMG offers such a course.
Find the nearest certified service facilities here.
The guidelines regarding the lifespan of lifting bags have been changed after thoroughly evaluating the strength of the material and composition of the bags.
The new guidelines are as follows:
“For lifting equipment, if the product is used as intended for lifting, the product will last for a maximum of 96 months (8 years) from the production date, this is split into 0-36 months of storage life before taken to use, followed by 60 months (5 years) from the first day of use.”
These guidelines are also applicable for bags previously purchased.
You should always see the relevant user instruction for guidance and use.
If you do not have the user instruction at your disposal you can find it here (link til document-portal).
At EMG we offer an instruction course for proberly inspecting our lifting bags. As long as your company has one or more employees who are certified through our inspection course you are able to act as an approved service facility.
Read more about our inspection course here.
Miscellaneous
Terms of delivery is DAP or Ex Works, unless other agreements have been made between seller and buyer.
Delivery time for domestic deliveries in Denmark is usually 2-3 business days.
Delivery time for export deliveries outside Denmark is usually 4-6 business days within the EU.
The stated delivery times are only valid for goods in stock. For sold-out goods the delivery time can be up to 16 weeks.
Read more about our delivery times in our terms and conditions here
Yes. We have partners across the world who sell and distribute our products.
You can see all of our partnered dealers here.
Writing directly on the fabric, is not something we encourage. However, it shouldn’t be an issue, as long as the ink is not oil based or otherwise damaging to the material.
- No solvents is allowed.
- Never write on the lifting slings/ribbon.
- We recommend writing on the hard bottom cover, if the bags has such.
Remember that EMG or Certified Dealers can have a logo and/or name, printed professionally on the bags if needed.
